Jvc Gr Ax7 Manual

1. Jvc Gr Ax 900 Manual
2. Jvc Gr Ax75 Manual Download

.Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety informa- tion and precautions contained in the following pages to ensure safe use of your new camcorder. Using This Instruction Manual. All major sections and subsections are listed in the Table Of Contents (.MAJOR FEATURES Program Manager Programme AE with Special Effects pg. 18, 19).Auto Mode Lock.Auto Mode Release.Electronic Fog Filter.ND Effect.Sepia.Twilight.Sports.1/1000 sec. High Speed Shutter.1/2000 sec. High Speed Shutter 5Sec.-Rec (5 sec.

Recording) pg.BN-V25U approx. USING THE BATTERY PACK Hook on. ATTACH BATTERY PACK Hook its top end to the camcorder and push the battery pack in until it locks in place. DETACH BATTERY PACK Slide BATT. RELEASE and pull out the battery pack.The CHG. Indicator may not light properly with a brand new battery pack, or with one that’s been stored for an extended period. In this case, remove and reattach the battery pack and recharge it.

Indicator should blink during recharging. If not, contact your nearest JVC dealer. To DC IN jack.GETTING STARTED Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power supply unit. OPEN COVER Open the clock battery compartment cover while pressing the release tab.Select Dial MENU Jog Dial Viewfinder MENU MENU END FOCUS AUTO AUTO EXPOSURE DATE TIME 1. 98 TELE MACRO TAPE LENGTH M.

AUTO ZOOM SPEED FAST NEXT Menu Screen DATE TIME YEAR 1998 MONTH 24-hour TIME 22:50 indication EXIT DATE/TIME Setting Menu.Viewfinder MENU MENU END FOCUS AUTO EXPOSURE AUTO DATE TIME 25. 98 TELE MACRO TAPE LENGTH M. AUTO ZOOM SPEED FAST NEXT Menu Screen TAPE LENGTH EXIT TAPE LENGTH Setting Menu MENU MENU END FOCUS AUTO EXPOSURE AUTO DATE TIME 25.Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs.

If the tab has been removed, cover the hole with adhesive tape. The cassette holder can’t be opened while the camcorder is in the record mode.Power Zoom Button Recording Start/Stop Button Set POWER to “CAMERA”. GETTING STARTED Grip Adjustment EXPAND LOOP Separate the Velcro strip. INSERT HAND Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Button.Then tighten the screw. CAUTION: When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder.

To prevent damage to the unit caused by falling over, do not use a small-sized tripod., then fold it back.Slide the LENS COVER Open/Close Switch to open the lens cover, then set the Power Switch to CAMERA.The power indicator lights and the camcorder enters the Record-Standby mode.The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE”.Retake function ( the end of the last recording so you don’t erase any of The LENS COVER warning blinks for about 5 seconds when the camcorder is turned on when the cover is closed. 8).Zoom-in Zoom indicator bar Power Zoom button Select Dial Viewfinder MENU MENU END FOCUS AUTO EXPOSURE AUTO DATE TIME 25. 98 TELE MACRO TAPE LENGTH M. AUTO ZOOM SPEED FAST NEXT Menu Screen ZOOM SPEED FAST SLOW EXIT ZOOM SPEED Setting Menu FEATURE.FEATURE: Retake PURPOSE: To re-record certain segments.

OPERATION: 1) Make sure the camcorder is in the Record-Standby mode. 2) Press either RETAKE button to reach the start point for new recording.

Pressing “F” forwards the tape and pressing “R” reverses 3) Press Recording Start/Stop Button to start recording.30 cm. Between the video light and people or objects. Do not use near flammable or explosive materials. It is recommended that you consult your nearest JVC dealer for replacing the video light.

RECORDING Basic Features (cont.) FEATURE: Video Light.To recall the display, engage the Record-Standby mode and press DATE/TIME repeatedly until the desired display appears. AUTO DATE RECORD Your camcorder automatically records the date for about 5 seconds after recording is initiated in the following situations: After changing the date.1 second later, the mode is activated. SEPIA After 1 sec.

Jvc Gr Ax 900 Manual

Select Dial RECORDING Programme AE With Special Effects All you have to do to access any of the variety of Viewfinder shooting effects is to turn the Select Dial. SELECT MODE Turn the Select Dial until the symbol of the function you want is aligned with the mark.LOCK AUTO LOCK Auto Mode Lock Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. In this mode the following controls are disabled; DATE/TIME display select, and the Menu Jog Dial.Fade-in Viewfinder EFFECT After 2 sec. FADER EFFECT WIDE Viewfinder NOTE (for Fader, Wide, Super LoLux, and Instant Titles) When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings (Fade-standby: “OFF”, Wide mode: off, Super LoLux: “MAX”, Instant Titles: off). Then when the Select Dial is returned to any position except AUTO LOCK, the above functions return to the settings you selected before turning it to AUTO LOCK.NORM: To record a subject in a dimly lit environ-: Allows you to shoot dark scenes with no Instant Titles The camcorder has eight preset titles in memory. You can superimpose one of them above a previously stored title as shown in the illustration to the left.Select Dial Viewfinder MENU MENU END FOCUS AUTO EXPOSURE AUTO DATE TIME 25.

98 TELE MACRO TAPE LENGTH M. AUTO ZOOM SPEED FAST NEXT MENU BACK REC TIME INT.

TIME TALLY LAMP CHARACTER JLIP ID NO. DEMO MODE MENU END CHARACTER A B C D E F G H I.DEMO MODE MENU END Normal Screen Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ACCESS MENU SCREEN Turn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial.When an object is in various shades of the same colour.When a predominantly red or brown object is being shot outdoors. In these cases, use the camcorder’s built-in preset filters for white balance adjustment ( Allows you to set the zooming speed ( pg.Allows you to enter an original title of up to 18 characters ( JLIP ID NO. This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP). The numbers range from 01 to 99.

Factory setting is 07.( pg. If zoomed-in in the auto focus mode, the camcorder could automatically zoom out depend- ing on the distance between the camcorder and the subject. When Tele Macro ( camcorder will not zoom out automatically.

” appears.Select Dial MENU Jog Dial Viewfinder MENU MENU END FOCUS AUTO EXPOSURE AUTO 25. 98 DATE TIME TELE MACRO TAPE LENGTH No indication M. AUTO during ZOOM SPEED FAST NEXT recording Menu Screen FOCUS AUTO MANU No indication EXIT during Focus Menu Screen.Select Dial Viewfinder MENU MENU END FOCUS AUTO EXPOSURE AUTO DATE TIME 25. 98 TELE MACRO TAPE LENGTH M. AUTO ZOOM SPEED FAST NEXT Menu Screen EXPOSURE AUTO MANU EXIT Exposure Menu Screen Manual Exposure Screen To brighten the image –.PREPARE WHITE OBJECT Point the camcorder at a white, flat object such as a sheet of white paper.

SELECT MWB Follow step 1 through 3 of the above, select “MWB”.Self-Timer You can set the delay between pressing the Recording Start/Stop Button and the actual start of recording. If you secure the camcorder, you (or whomever is operating the camcorder) can enter the scene before recording starts. NOTE: Make sure the camcorder is in the Record-Standby mode before performing the following steps.NOTE: Make sure the camcorder is in the Record-Standby mode and the recording mode is set to “SP” before performing the following steps. ACCESS MENU SCREEN Turn the Select Dial to any position except AUTO LOCK, then press MENU Jog Dial.Press REW to rewind, or FF to fast-forward the tape during Stop mode. NOTE: The camcorder shuts off automatically after about 5 minutes in Stop mode. To turn on again, set the Power Switch to “POWER OFF”, then to “PLAY”.Dial.

When Auto Tracking finishes, the indication disappears. NOTES: When noise bars appear during playback, the camcorder enters the Auto Tracking mode and “AT” is displayed. Manual Tracking may not work with tapes recorded on other VCRs or camcorders.STOP FEATURE: PURPOSE: COUNTER R/M OPERATION: PLAY/PAUSE NOTE: FEATURE: PURPOSE: OPERATION: NOTE: FEATURE: PURPOSE: OPERATION: NOTES: PLAYBACK Features (cont.) Still Playback To pause during playback. 1) Press PLAY/PAUSE during playback.

2) To resume normal playback, press PLAY/PAUSE again. Noise bars appear and pictures may become monochrome during Still Playback.Recording safety hole Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder. It is fully compatible with any VHS video cassette recorder. The C-P7U adapter is battery powered and automatically performs tape loading and unloading.VIDEO OUT connectors on the camcorder and those on the VCR. SUPPLY POWER Turn on the camcorder, the VCR and the TV. SELECT MODE Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.VCR. SELECT VCR MODE Engage the VCR’s AUX and Record-Pause modes.

FIND EDIT-IN POINT Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it’s reached, press PAUSE on the camcorder. START EDITING Press PLAY on the camcorder and engage the VCR’s.Remove the cassette and disconnect the power source, then after a few minutes, try turning the power back on. If it still doesn’t come on, consult your nearest JVC dealer. Make sure the Erase Protection tab is in the position that allows recording.Lens Cover Warning indicator blinks. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.

In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as usual from the beginning.q w e r & INDEX.20. It is used to connect the camcorder to a device pg. 21 such as a personal computer. 21 For further details consult your nearest JVC pg.

8. JLIP-controlled editing from camcorder to VCR is not possible if the VCR is not equipped with pg.Viewfinder Indications Cassette Warning / Tape Remaining Time. When no cassette is inserted: the cassette ( warning blinks. When Erase Protection tab is not in the position that allows recording: the cassette ( lights. Otherwise, the tape remaining time is displayed and the tape remaining time warning blinks when the tape is about to reach its end. When operating, keep a distance of about 30 cm between the video light and people or object.

Do not use near flammable or explosive materials. It is recommended that you consult your nearest JVC dealer for replacing the video light. General Battery Precautions.Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

CAUTIONS For Your Maintenance 1. After Use Set the power switch to “POWER OFF” to turn off the camcorder.RF Unit RF-V5E.Compact VHS-C Cassettes EC-60/45/30.Active Carrying Bag CB-V7U Some accessories are not available in some areas.

Jvc Gr Ax75 Manual Download

Please consult your nearest JVC dealer for details on accessories and their availability. Specifications shown are for SP mode unless otherwise indicated.

DescriptionThe JVC A-X7 is a pure negative feedback, super A integrated amplifier featuring DC servo equalisation amplifier for both MC and MM cartridges and direct power supply system with emphasis on power and extra high operability thanks to the non-clearance volume knob. SpecificationsPower output: 90 watts per channel into 8Ω (stereo)Frequency response: 1Hz to 400kHzTotal harmonic distortion: 0.003%Damping factor: 100Input sensitivity: 0.2mV (MC), 2.5mV (MM), 200mV (line)Signal to noise ratio: 69dB (MC), 85dB (MM), 110dB (line)Output: 200mV (line)Dimensions: 139 x 450 x 426mmWeight: 12kgYear: 1980 Downloads. That's a really great question. Kenwood's products since the late 1990's has REALLY dropped in quality, so I imagine that JVC's stuff from recent times is also cheap. Indeed JVC has ended camcorder production in Japan and also has drastically reduced the number of variety in product generally. JVC is not the only company to do this Pioneer has sold their consumer electronics business to Onkyo, and has sold 85% of their DJ brand to KKR. It seems that with all of the phones, and Bluetooth speakers, HiFi Component Audio products are obsolete to everyone but the audiophiles.

Most audiophiles probably invest mostly in Vintage equipment like the ones seen here at Hifiengine making newer equipment once again left out in the cold.-Recaptcha (I am not a robot).